ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

BSOD screen appear during work

 
crider
Occasional Contributor

BSOD screen appear during work

I have two ML150 G3 server, locaited in different buildings, and there is a some trouble. I use servers for program GO1984 to record video streams from ip cameras, and often BSOD screen appear during work with message
KERNEL_STACK_INPAGE_ERROR
STOP (0X00000077
0X000000E
0X000000E
0X00000000
0X00AF4000)

During the boot after fail, message "FAILURE occured during last power" (or some of that king), at the time of testing SmartArray E200.

In there is no error messages in system evet journal of W2003server.

I think that this error connected with Smart Array controller E200

I have installed last drivers for Controller (25/07/2007), but there is no effect.

Loading on disk's subsysstem is very high.
I use RAID 5 on 5 disk drives.

What can I do with this problem?
3 REPLIES
KarloChacon
Honored Contributor

Re: BSOD screen appear during work

hi

check this information

http://msdn2.microsoft.com/en-us/library/ms794027.aspx

regards
Didn't your momma teach you to say thanks!
crider
Occasional Contributor

Re: BSOD screen appear during work

check this information
http://msdn2.microsoft.com/en-us/library/ms794027.aspx
regards

Already done, but there is a common information and in STOP () these is no information about what it can be.
KarloChacon
Honored Contributor

Re: BSOD screen appear during work

hi again

check this one

http://support.microsoft.com/kb/q228753/

specifically code

0xC000000E, or STATUS_NO_SUCH_DEVICE: the drive went unavailable, possibly a bad hard drive, disk array, and/or controller card.

so reseat HDDs, controller and cables
and not a bad recommendation update firmware
if the issue continues it might be HDD - or controller

regards
Didn't your momma teach you to say thanks!