ProLiant Servers (ML,DL,SL)
1748275 Members
3707 Online
108761 Solutions
New Discussion юеВ

Re: Bad sectors on ProLiant ML110 G3

 
Nagy Barnab├бs
New Member

Bad sectors on ProLiant ML110 G3

Dear Everyone!

We've got a Proliant ML110 G3 server, and there are a lot of error appears in the event log from the Disk. The events says: The driver detected a controller error on \Device\Harddisk0.

I installed many Hard Disk diagnostics program, but because of the RAID 1, I was not able to access the S.M.A.R.T. table.

Last time I installed HP storage manager, and it's found many bad sectors, and the wrong disk.

My question is that, is there any way to replace the faulty device from the RAID 1 with a new HDD?
How do I rebuild the RAID after the replacement?

Thanks for the help

B

2 REPLIES 2
KarloChacon
Honored Contributor

Re: Bad sectors on ProLiant ML110 G3

hi

you can rebuild you new HDD using the utility you already got "HP storage manager" just search in the help "rebuild" you get the answer

also using Array configuration during POST...
pag3 7
www.jraf.ru/books/embedded_sata_raid_manual.pdf

bye
Didn't your momma teach you to say thanks!
Nagy Barnab├бs
New Member

Re: Bad sectors on ProLiant ML110 G3

Hi!

Thanks for the answer. I didn't find the raid rebuild in the help, but I think the pdf you posted is usable. I will try it soon.

Thanks for your help

B