Basic - Cannot turn on!!

[andyz99]

I appreciate this is a really basic question, but out of the box is there something I should know how to turn it on?

With the psu connected - no light on the psu, and the amber power light, and the power status is amber.

Reading the docs = in standby? Not even been turned on yet? - so not sure how it can be in standby.

I have tried a different psu (modular variety) - same issue.

UID light will turn on & off

Both nic lights will come on if and when I connect eth.

I am starting to question my ability???

Please help

Many thanks

Andy

[andyz99]

Sorry forgot to mention it is a Proliant ML110-G7

Thanks

[andyz99]

Another addition - there is a row of led's (nine in total) just below the RPS cable connector - I cannot identify what they are but the far right one is flashing.

[andyz99]

Now another addition...
I have found a jumper in the case - not connected, so assuming it has come off the board - does anyone know where I can get a plan of the board with the jumper locations etc.
thanks

[andyz99 · Accepted solution]

Well - by luck/chance or something I seem to have found the place for the jumper, and it seems to be installing SBS now so there we are.

Thanks