Beep codes for a ML370 G3

[Ian Allaway]

Hello all I was wondering is there any way of finding the beep codes for the ML370. When I switched on machine I had a seris of beeps which were 2short 2short 2short 2short 2Long and 2short. Nowhere can I find what this means. I hope someone out there can help.

Thank you
Ian

[Igor Karasik]

HP ProLiant Servers Troubleshooting Guide
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00300504/c00300504.pdf
Beeps code - from page 92

[Ian Allaway]

Thank you I looked in the link you sent but I cant find the codes I have. It only shows either 2 short or 1 or 2 long not the series of codes I have.

[Marcus Salim]

Ian,

I recently worked on a server of the same model/gen, which produced the same series of beeps when powered on. On my system, I also noticed erratic behavior in the cpu/drive fans. I had a suspecion that the system board will not produce any series of beeps conforming to the service guide if it were the board itself that was badly damaged, which led to replace the system board first in the process of elimination. I didn't need to go any further than the system board--turns out it was the culprit. Hope this helps.