HPE Community
ProLiant Servers (ML,DL,SL)
1752571 Members
5063 Online
108788 Solutions
New Discussion

Best way to replace RAID 1 disks, with one disk Predictive Failure and other disk totally failed

 
Pradeep8985
Occasional Contributor

‎08-30-2016 03:01 PM - edited ‎08-30-2016 03:06 PM

‎08-30-2016 03:01 PM - edited ‎08-30-2016 03:06 PM

Best way to replace RAID 1 disks, with one disk Predictive Failure and other disk totally failed

Hi ,

I have OS disks in RAID1, where one of the disk is predictive failure and other disk is total failure. What is the best way to replace these disks with data intact.? Will i be able to do it. If so, How?

Model: DL360

 

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎08-30-2016 09:57 PM

‎08-30-2016 09:57 PM

Re: Best way to replace RAID 1 disks, with one disk Predictive Failure and other disk totally failed

replace the bad disk and cross your fingers.

Keep your backup prepared.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.