HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Bios Proliant ml 370 1000 mhz

 
dadino
Occasional Advisor

Bios Proliant ml 370 1000 mhz

Excuse for my stupidity
How i can enter in to bios of my server

While postin i can set with f8 only my smart array controller.
Any suggest?
Thanks
3 REPLIES
Prashant (I am Back)
Honored Contributor

Re: Bios Proliant ml 370 1000 mhz

It's F9

Same thing i have posted earlier also
where F1 was the problem.
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=991581

Prashant S.
Nothing is impossible
Igor Karasik
Honored Contributor

Re: Bios Proliant ml 370 1000 mhz

If you don't have "F9" during POST proccess - it means you don't have System configuration utility (SCU) installed on system partition of the disk.
Therefore you need to use SmartStart 5.50 CD or Compaq System Configuration Utility
diskettes
http://h18023.www1.hp.com/support/files/server/us/download/22678.html
http://h18023.www1.hp.com/support/files/server/us/download/13227.html
Prashant (I am Back)
Honored Contributor

Re: Bios Proliant ml 370 1000 mhz

Yes might be be possible it is missing so we need to install.
http://www.geocities.com/rlcomp_1999/manual-smartstart.html

Prashant S.
Nothing is impossible