cancel
Showing results for 
Search instead for 
Did you mean: 

Bios access

 
Ayman Altounji
Valued Contributor

Bios access

i accidently hit a key which disable smart arrray not as first boot loader. when i get back to access a bios by hit F10, i couldnt get to the menu. i always seeing a server boot from NIC/Networks. what should i do? i've try to hit F9 and insert my smart array cd to boot from it. but it's always hang when the cd read the xxxxxxx.cfg. help me please.
1 REPLY
Ayman Altounji
Valued Contributor

Re: Bios access

Hi, what you need to here I believe is to reseat the bios. If you said you are hitting f9 that mean it?s a RBSU bios and you cannot use the SCU diskette to clear the NVRAM (reset) but you can use the maintenance switch on the system board to clear the NVRAM. Check on the decal (sticker) inside the panel, or check the web for the location of that maintenance switch (usually called sw1). You could also call tech support for any precision. Hope this will help.