cancel
Showing results for 
Search instead for 
Did you mean: 

Bios

 
Ayman Altounji
Valued Contributor

Bios

Whilst udating my bios the process was interupted now my server is dead!! Any ideas anyone?
1 REPLY
Ayman Altounji
Valued Contributor

Re: Bios

1. Open the machine, Change SW1 Switch Setting on the motherboard
(S1,S4,S5,S6) from OFF to ON.
2. Restart server with floppy-disk containing the newest ROM-Image. You will hear two long Beep and short Beep. 3. You can see that the system is accessing the diskette. This takes some time so you need to be patient. 4. Finally you hear some more beeps (like a kind of melody) and the diskette is not accessed anymore. 5. Then power off the machine and reset the SW1 settings (as per step 1) back to OFF. 6. Power up the system again and problem should be resolved.