ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Bl35p boot failing

Rui Figueiredo
Occasional Visitor

Bl35p boot failing

I have 5 servers (BL35p). 2 of them fail in the boot process.

After detecting the processor and memory, the following message appears:

"Unable to Load LSI Logic Corp. MPT BIOS
MPT BIOS FAULT 02h encountered at adapter PCI (04h, 01h, 00h) Fusion-MPT Firmware Fault Code: 8011h"

This mean that i have to upgrade the firmware?

Thanks for your answers.
5 REPLIES
ramesh_naik_
Esteemed Contributor

Re: Bl35p boot failing

Hi Rui,

Seems to be a similar issue like the one below.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1051275

Worth a try!!!!

Hope it works !!!!

Regards,
rmn
Rui Figueiredo
Occasional Visitor

Re: Bl35p boot failing

Thanks for your help but the problem that i have doesn´t have to do with "4 minutes blocked" like the other thread.

I updated the firmware of the Bl35p to a recent version ( provided by hp) but the result is the same.

"Unable to Load LSI Logic Corp. MPT BIOS
MPT BIOS FAULT 02h encountered at adapter PCI (04h, 01h, 00h) Fusion-MPT Firmware Fault Code: 8011h"

One thing weird is sometimes the server boots perfectly and others we blocks.

I thanks for some help!
Oleg Koroz
Honored Contributor

Re: Bl35p boot failing

can you swap or at least reseat SAS controller ?

BL35 SAS model ?
Rui Figueiredo
Occasional Visitor

Re: Bl35p boot failing

Server:HP Proliant BL35p

SAS: Internal 4 Port SAS HBA (on a mezzanine card) supports RAID 0 or 1


I can´t understand your reply when you ask " if i can swap or reseat the SAS". what did you mean?

sorry i newbie in this matters
Oleg Koroz
Honored Contributor

Re: Bl35p boot failing

If you open Server at right end side you have SAS controller if you swap SAS from one to Second good known Server where is the Problem stay ?