1748102 Members
5369 Online
108758 Solutions
New Discussion юеВ

Re: Blade Enc-Cclass

 
SOLVED
Go to solution
Robert Aresteo
New Member

Blade Enc-Cclass

Hello

I am having problem Managing Blade Infrastructure, I've got blade server disabled or red mark in the management console. it gives us an error management console disabled.

Please Advice
4 REPLIES 4
Robin_37
Trusted Contributor
Solution

Re: Blade Enc-Cclass

Dear Robert

Please advice which blade server you are using, i suggest you to upgrade C-class onboard administrator firmware.

Please find the link below
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1842750&prodNameId=3288156&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-24b81875234f43f998d3b8afcb

Regards

Robert Aresteo
New Member

Re: Blade Enc-Cclass

Dear Robin

Thanks for your quick reply i will try the upgrade this evening

we are using Bl460c

Cheers

Robert
Robin_37
Trusted Contributor
TarunJain
Respected Contributor

Re: Blade Enc-Cclass

Dear Robert,

It would be safe to upgrade the ilo2 firmwares & server BIOS first & OA firmware later.
Also upgrade the ilo2 firmware & BIOS on all the blades instead of just affected one & Schedule for a downtime so that the whole enclosure could be resetarted after OA firmware upgradation

& If the issue dosn't resolves then the system board needs to be replaced.

Hoping it will help
TarunJain

I am an HPE Employee

Accept or Kudo
src="/html/assets/hpe_banner_SME_signature.p ng">