ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Blade RDP installation problem

SOLVED
Go to solution
stefano colombo_1
Super Advisor

Blade RDP installation problem

I've setup a Blade rack. installed the RDP deployment software and tried to power-on a blade to make an installation.
The blade gets it's IP address from the DHCP server ( which is a different server from the RDP server ) and contact the RDP.
The bootworks starts loading , it gets the dos based boot image and start the process, but after a while it stops with the error -Altiris--Option-06! unknown
Do I have to set up an option in the DHCP ? Did I miss some configuration on the RDP server ?

Thanks
6 REPLIES
Oleg Koroz
Honored Contributor

Re: Blade RDP installation problem

what happend if you remove option 06 if it's Unknown ?
stefano colombo_1
Super Advisor

Re: Blade RDP installation problem

Remove from where ? The DHCP server you mean ?
stefano colombo_1
Super Advisor

Re: Blade RDP installation problem

The DHCP option 06 is DNS servers, so I cannot remove it
Steven Baillie
Trusted Contributor
Solution

Re: Blade RDP installation problem

hi


you need option 060 PXE client in the DHCP scope.



steven
stefano colombo_1
Super Advisor

Re: Blade RDP installation problem

Hi Steven ,
I thought the same and I tried to manually add the 060 option in the DHCP servers . However after that the blades couldn't get the IP address anymore but stuck in the process of acquiring it without any error.

We have solved installing the newer version 2.20 . Which is very different and it configures correctly the DHCP even if is on another server

stefano colombo_1
Super Advisor

Re: Blade RDP installation problem

Installing RDP version 2.20 solved the issue