HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Blade server 20P - SIGSEGV

Occasional Contributor

Blade server 20P - SIGSEGV

Hi all;

Currently, I am using HP RDP 2.10 with Altiris DS 6.1 SP2 to deploy windows OS on the blade 20P servers, but one of the blade always having error message "Exiting due to signal SIGSEV... and some memory address".

The error occured after having DHCP and before established a netwrok connection to the DS.

Other blades on the same enclosure are working fine; no issue(s) with the deployment. I wonder whether this is a hardware error on the blade or not. If not hardware error, then how it can be fixed.

Any hints? Thanks a lot.