ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Blades and Ethernet Connectivity Mapper utility

 
FunkyMaestro
Occasional Visitor

Blades and Ethernet Connectivity Mapper utility

Hi there,

Just received a brand new enclosure filled with BL20p G3 and wondering how to assign those 4 NIC's to the A and B switches (we use the Cisco modules). It looks like I need to map it according to my needs using the "Ethernet Connectivity Mapper" utility but I can't figure out where I should install this tool. Can anybody help me ? Thanks in advance !
8 REPLIES
Oleg Koroz
Honored Contributor

Re: Blades and Ethernet Connectivity Mapper utility

Mapper, you can skip
For BL20p G3

1,2 A Side
3,4 B Side

see attachment
Craig Jackson_3
Frequent Advisor

Re: Blades and Ethernet Connectivity Mapper utility

Just to make things more fun, a BL25 is A, B, A, B.
FunkyMaestro
Occasional Visitor

Re: Blades and Ethernet Connectivity Mapper utility

Thanks for your answers guys I'll continue from that point. Can't think of the day we'll have a mix of Intel and AMD blades ;-)

Cheers
Oleg Koroz
Honored Contributor

Re: Blades and Ethernet Connectivity Mapper utility

see attach for Bl25
Oleg Koroz
Honored Contributor

Re: Blades and Ethernet Connectivity Mapper utility

Attach.. for Patch panel, however layout where they go A or B same
FunkyMaestro
Occasional Visitor

Re: Blades and Ethernet Connectivity Mapper utility

I'm curious, in what PDF file did you find that illustration ? I couldn't get a hand on it. Thanks in advance :-)
Oleg Koroz
Honored Contributor

Re: Blades and Ethernet Connectivity Mapper utility

I used old one and Modified long ago when BL25 was released, had not searched trough new PDF
Oleg Koroz
Honored Contributor

Re: Blades and Ethernet Connectivity Mapper utility

BTW. if you launch Mapper it will gave you Correct layout for 20 or 25 it can be run anywhere PC, laptop not mandatory to be installed at blade