- Community Home
- >
- Servers and Operating Systems
- >
- HPE ProLiant
- >
- ProLiant Servers (ML,DL,SL)
- >
- Re: Blue Screen in Recovery Console on my DL380 G2
ProLiant Servers (ML,DL,SL)
1752798
Members
5880
Online
108789
Solutions
Forums
Categories
Company
Local Language
юдл
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
юдл
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО04-02-2003 03:11 PM
тАО04-02-2003 03:11 PM
Blue Screen in Recovery Console on my DL380 G2
I have not experienced this on the first generation 380's but when ever I go into the recovery console (part of our stadard testing procedure preceding deployment)I get a blue scree with an error that reads: In Acessible Boot Device. If I boot up normally the server runs great. Two of my G2's do this. We also have a large number of DL580 G2's that are currently being brought online and so I tested the recovery console boot up from these servers with the same result. I even tried booting the recovery console off the Win2K disc and it comes up with a message stating that it cannot see any of the drives on the array.
I have the Smary Array 5i card in the 380's and the 5iPlus in the 580's. The latest firmware is running on both. Has anyone experienced this before with the G2 line? Any help would be much obliged.
I have the Smary Array 5i card in the 380's and the 5iPlus in the 580's. The latest firmware is running on both. Has anyone experienced this before with the G2 line? Any help would be much obliged.
2 REPLIES 2
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО04-03-2003 07:28 AM
тАО04-03-2003 07:28 AM
Re: Blue Screen in Recovery Console on my DL380 G2
This is happening, because recovery console only works with controllers Win2000 has drivers for by default. This isn't anything having to do with the 5i's, but any newer controllers which required F6 to be pressed for during the install.
I assume you're attempting to select this in the boot.ini and not from the Win2000 cd. If you press F6 on the cd and specify the driver, it should work fine.
I would recommend using this method for getting this driver installed:
1) Copy "cpqcissm.sys" to the \cmdcons folder
2) Edit the txtsetup.sif file in the \cmdcons folder and add the following lines to the following sections: a. [SCSI.LOAD] cpqcissm = cpqcissm.sys,4 b. [SCSI] cpqcissm = "Compaq Smart Array 5i Controller Support Software for Windows 2000"
I assume you're attempting to select this in the boot.ini and not from the Win2000 cd. If you press F6 on the cd and specify the driver, it should work fine.
I would recommend using this method for getting this driver installed:
1) Copy "cpqcissm.sys" to the \cmdcons folder
2) Edit the txtsetup.sif file in the \cmdcons folder and add the following lines to the following sections: a. [SCSI.LOAD] cpqcissm = cpqcissm.sys,4 b. [SCSI] cpqcissm = "Compaq Smart Array 5i Controller Support Software for Windows 2000"
The truth is out there, but I forgot the URL..
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО04-03-2003 11:06 AM
тАО04-03-2003 11:06 AM
Re: Blue Screen in Recovery Console on my DL380 G2
Terry "Guru" Hutchings - Thanks for the assist. It worked and I am very appreciative of your sage like wisdom. I was getting a vicious knot on my head from pounding it against my desk for so long.
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP