Blue Screen on a DL385 G1

[MT19]

We have a DL385 G1 server with two dual-core 2.40Ghz processors and 4GB memory (2x2GB DIMMS). All the firmware is up to date, but once a day the server keeps blue screening with the below error. Does anyone know what the issue could be? Thanks....mark

System Crash - Message: BugCheck, STOP: 0x0000009C (0x0000000000000000, 0xFFFFFADF95891240, 0x00000000F60C0000, 0x0000000000010015)

[Gary Antonio Benavides]

A supported Hotfix is available from Microsoft to resolve only the specific functionality issues described

http://support.microsoft.com/kb/939315

or check the following Link

http://support.microsoft.com/kb/162363/es

[KarloChacon]

hi Mark

Firmware up to date right?

Ok what about Drivers (PSP)?
just in case latest version

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=428936&prodNameId=3288114&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-9602c6c78829482d89b1432e46

and latest storport version
http://support.microsoft.com/kb/932755

regards

[MT19]

PSP and hotfix didn't resolve the issue. Server was still blue screening. Tried replacing the memory and still would blue screen. Processors and PPMs were then replaced and so far the server has not blue screened since the weekend when parts were replaced. Thanks for the feedbacks!