cancel
Showing results for 
Search instead for 
Did you mean: 

Blue Screen

 
Ayman Altounji
Valued Contributor

Blue Screen

On Nt boot I have a blue screen when I choose the first option (no VGA) . When I select VGA option, I don't have problem.

The video controller on board is a ATI RAGE IIC.
On Nt, I installed "VGA compatible display adapter" with 640X480 16 colors resolution.
1 REPLY
Ayman Altounji
Valued Contributor

Re: Blue Screen

Try This.
1 - Boot the system into VGA mode.

2 - Run the setup for the SSD from the CD :\CPQSUPSW\NTSSD\Setup.exe

3 - Install the ATI Rage IIC driver using the upgrade button

4 - Do not close the SSD utility yet.

5 - Open the display icon in control panel and set the resolution to 800X600 256 colors or better.

6 - Close the display applet and then close the SSD utility.

7 - Reboot.