cancel
Showing results for 
Search instead for 
Did you mean: 

Boot Error

Ayman Altounji
Valued Contributor

Boot Error

I am getting an error that reads "Serial cable error detected. (Check for proper cable type.)" It occurs right after the POST checks the RAM and it will not continue. Nothing is connected to the server and I've even gone as far as disconnecting the floppy, CDROM, etc. and removed all PCI cards. Anyone have any ideas?
1 REPLY
Sunil Jerath
Honored Contributor

Re: Boot Error

Hello,
Please clear the NVRAM and run system configuration and should be able to boot normally.

Regards,