cancel
Showing results for 
Search instead for 
Did you mean: 

Boot Errors

Ayman Altounji
Valued Contributor

Boot Errors

Here are two error messages that I have been receiving upon bootup. The process freezes during these two errors.

First I was getting this message: ERROR: BAD BASE IMAGE CODE.

This error occured a few times but I could boot to NT if I tried enough times.

Now, I am getting this message: BOOTWARE MODULE NOT FOUND.

I have not been able to boot to NT since this started showing up. Any ideas what to look for?
1 REPLY
Ayman Altounji
Valued Contributor

Re: Boot Errors

What hardware do you have installed in this system? This sounds like an error from a NIC or other such card...