cancel
Showing results for 
Search instead for 
Did you mean: 

Boot Sequence

Ayman Altounji
Valued Contributor

Boot Sequence

During the sequence boot, the machines got stop on this request:
Press F1 to continue or F10 for system Partition Utilities.
How is possible to avoid this and let the machine goes on whit the normal boot?

This happens after the successful installation of win 2K.
Any suggestions is a good welcome.
Thanks.
1 REPLY
Mark Cloutier
Respected Contributor

Re: Boot Sequence

You need to go into the F10 Partition. Now at the first window please press CTRL A. This should bring up a windows asking for ADVANCED MODE. Press ENTER to agree.Go to SYS CONFIG -> Config HW -> Review and modify -> view and edit details. Hit PAGE DOWN twice and there you will see F10 Boot Prompt.Set it to DIABLED and save and exit. You should be good to go.
We are here for a good time, not a long time!