Boot drive, not on Array card.

[Bradley Taylor]

Is there a way to set up a bootable SCSI drive on a device other than an Array controller?
Server Proliant ML350 G2

[Janine Bertolo]

Yes.

The ML350 G2 ships with a dual-channel embedded Ultra3 scsi controller.

connect the boot drive to that controller and set the controller as the boot device in the F9 - Rom-Based Setup Utility.

Cheers,

Janine

[Bradley Taylor]

Hi,

Only Array controller available from
"F9 - Rom-Based Setup Utility".
I need to connect it to a RIB card.

The problem was that originally I connected a SCSI disk to the RIB card as I was unable to get the Array to work.
Was able to run this up without any problems and was selectable from Rom-Based Setup Utility.
Then I connected another SCSI disk to the Array controller (swapped previous disk) and was successful in this build.
When I went back to install the old disk (as I have to do a dump of the DB and backup files) it was no longer available in the "F9 - Rom-Based Setup Utility".
Any idea on how to get this back.

Thanks Brad