ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Boot off SmartStart CD then...

 
frank muise
Occasional Advisor

Boot off SmartStart CD then...

"This Kernel requires on x86 - 64 CPU, but only detected an i686 CPU. Unnable to boot, please use a kernel appropriate to your CPU."

Any suggestions on what I should do here, did some research on error but mostly just came up with Virtual stuff.

Intel Xeon Processor 2.8 GHz/400MHz - 512KB, the system is currently using two of these.

Following link is to the quick specs to the serve rI am operating, HP DL380 G3.

http://h18000.www1.hp.com/products/quicKspecs/11473_div/11473_div.HTML
1 REPLY
WhiteShadoW
Advisor

Re: Boot off SmartStart CD then...

Hi, Frank

You get the normal error Smart start.

HP SmartStart CD x32 8.25
11 May 2009

No support for higher versions...