HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
Showing results for 
Search instead for 
Did you mean: 

Boot problem after install woody on DL360 G4

Occasional Contributor

Boot problem after install woody on DL360 G4

HI everybody!!

I managed to install woody (mini iso Kernel 2.4.25)on DL360 G4 (thanks to this iso, my scsi raid1 disks are seen).

I partitionned, installed kernel and base system, and rebooted to continue installation.

But when rebooting, after few seconds, the screen hang with strange lines repeating many times, i cant read what is written because it is to fast.
After one minute of this, the system reboot and it does it again and again...

I ve no error, no kernel panic.
It is very strange, could somebody help me????

Thanks a lot!!
Sorry for my english.
Terri Harris
Honored Contributor

Re: Boot problem after install woody on DL360 G4

I recommend posting Linux-specific questions to the LINUX forum (if you have not already).