cancel
Showing results for 
Search instead for 
Did you mean: 

Boot problem

Ayman Altounji
Valued Contributor

Boot problem

I just installed two more processors into my ProLiant 6500 running Windows 2000, both processors were recognized in BOOS. I then went into System configuration and confirmed that PIC Mode had "Full Table, Mapped" selected. Then I went into Windows system configuration and selected "APCI Multiprocessor". After that I re booted the system and now it will not boot past the "Starting Windows" screen. I've tried starting "Last Known Good" and "Safe Mode", but windows stalls at the same spot. Any help would be great. Thanks
1 REPLY
Ayman Altounji
Valued Contributor

Re: Boot problem

Never mind, I did a Windows repair and got they system working again. Thanks Anyways.