HPE Community
ProLiant Servers (ML,DL,SL)
1751854 Members
5865 Online
108782 Solutions
New Discussion

Booting of Single SCSI Drive in 3 Disk Array

 
SFIndustries
New Member

‎01-10-2007 04:13 PM

‎01-10-2007 04:13 PM

Booting of Single SCSI Drive in 3 Disk Array

I am working with a ProLiant ML350 with 3 SCSI drives. I am wondering if it is possible to boot off one single SCSI drive (loaded with OS), Then use the 2 other drives mirrored using RAID 1 for data? If so any advice would be appreciated.
0 Kudos
Reply
1 REPLY 1
Marek Nelec
Honored Contributor

‎01-10-2007 10:21 PM

‎01-10-2007 10:21 PM

Re: Booting of Single SCSI Drive in 3 Disk Array

Of course it is possible. If you are using RAID controller you need to create RAID-0 Array A using one drive, and a logical drive on that array, and create RAID-1 Array B using 2 drives and a logical drive on the second array.
If you are not using RAID controller, you will have to create RAID-1 under operating system (if the system provides such support)
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.