ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Break Mirrored Server

 
fady1
Occasional Visitor

Break Mirrored Server

Dear All,

Can you please help me with the following case?
The C & D are mirrored & I want to break the mirror of the D only.
I know physically the mirrored HDs linked together from the blinking led; but I don't know which pair is the C & which is the D!
The C & D are mirrored separately (i.e. 2 HDs for the C & 2 HDs for the D = 4 in total).
It is Windows Proliant..

How to differentiate?

Thanks in advance,
Fady Sourour
3 REPLIES
Torsten.
Acclaimed Contributor

Re: Break Mirrored Server

Did you try my advise?


(thread deleted)


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
fady1
Occasional Visitor

Re: Break Mirrored Server

I checked the link & posted my question in the right place as you mentioned!
You meant this, didn't you?
Torsten.
Acclaimed Contributor

Re: Break Mirrored Server

No, I meant working with ACU and compare the data with the disk management utility.


However, unless you did something unusual the first logical drive is C: anyway.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!