ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Brooktrout TR1034 Fax Card in DL380/G3

Gary Ng
Occasional Visitor

Brooktrout TR1034 Fax Card in DL380/G3

I am having problem of install the Brooktrout TR1034 E1 Fax Card into DL380/G3 Server, we tried both Win2k & Win2k3, also cannot be recognize, but with the same card, we can operate in DL580/G2 Server, we are using Interstar LightningFax Fax Server, but even we try to use the Brooktrout supplied diagnostic program, still cannot find the card, I am wonder if there anyone successfuclly run the card in DL380/G3 Server, please advice, thanks!
2 REPLIES
Prashant (I am Back)
Honored Contributor

Re: Brooktrout TR1034 Fax Card in DL380/G3

Hi,

I have the following details with me

DL580/G2---------------------------------

Expansion Slots 6 - Total PCI I/O slots consisting of:

* 4 - 64-bit/100-MHz PCI-X Hot Plug, slots 3, 4, 5 and 6 available.
* 2 - 64-bit/100-MHz PCI-X Non-Hot Plug, slot 1 available, (NIC in slot 2)
* All slots support 3.3 Volt or Universal (3.3/5.0V) cards only

DL 380 G3---------------------------------------
Slot 1 PCI-X Bus 1 133 MHz 1.066GB/s 64-bit PCI-X (3.3V), non hot-plug
Slot 2 PCI-X Bus 2 100 MHz 800 MB/s 64-bit PCI-X (3.3V), hot-plug
Slot 3 PCI-X Bus 2 100 MHz 800 MB/s 64-bit PCI-X (3.3V), hot-plug


So, only feature which differes is this
All slots support 3.3 Volt or Universal (3.3/5.0V) cards only

I think i am helping you, but i thought i must update you that depends upon compatibility of card with server.

Regards,
Prashant S.
Nothing is impossible
cernaux
Occasional Visitor

Re: Brooktrout TR1034 Fax Card in DL380/G3

You need to have OpenText software like RightFax Server in order to detect the hardware. There is no driver for it other than the one embedded in such software. Every RightFax Server installation is hardware specific so the model matters.