ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

BugCheck, STOP: 0x0000000A (0x0000078E

Frank Locke
Occasional Visitor

BugCheck, STOP: 0x0000000A (0x0000078E

Has anybody seen this bugcheck before?
Blue Screen Trap (BugCheck, STOP: 0x0000000A (0x0000078E, 0x00000002, 0x00000001, 0x8006543A))

I have a Proliant DL360 G2 with the version 7.0 management agents installed (WIN2K server).
3 REPLIES
SAKET_5
Honored Contributor

Re: BugCheck, STOP: 0x0000000A (0x0000078E

Hi,

What happens after the blue screen error? You cant load the OS? I would perform a NMI dump/reset using the NMI switch on the motherboard first to see if this resolves the problem.

Other obvious ones would be to check if any new incompatible hardware or software that you have installed is causing this error.

Hope, this helps and dont forget to assign the points.

Ciao!

Prashant (I am Back)
Honored Contributor

Re: BugCheck, STOP: 0x0000000A (0x0000078E

Hi,

check with the Bios update and then check again might help you.

Regards,
Prashant S.
Nothing is impossible
Jean_26
Occasional Visitor

Re: BugCheck, STOP: 0x0000000A (0x0000078E

Hi,

I have same problem with new server but hp support changed mother board immediatly because it's hardware problem.

Ok