cancel
Showing results for 
Search instead for 
Did you mean: 

CD Boot

Ayman Altounji
Valued Contributor

CD Boot

I am trying to boot from my Proliant 6000's CD-ROM. I have set the correct boot order in the BIOS configuration but the server only boot's from A: and C:. When in Windows NT i am able to read CD's so i dont think the drive is at fault !

Can anyone help ?
2 REPLIES
Mark Cloutier
Respected Contributor

Re: CD Boot

One thing you can try is to jumper the cdrom to Master or slave. They usually come set as Cable select.
We are here for a good time, not a long time!
Ayman Altounji
Valued Contributor

Re: CD Boot

The CD-ROM was at fault, swapped the drive and everything work a treat !

Thanks for you help.

Scott