CL380 error event id 11 driver cpq32fs2

[Jean_26]

I have a server cl380 with problem about smart array controller CR3500.
when i try turn on node two this one hang and event viewer from windows 2000 advance server report this error:

event id: 11
source: cpq32fs2
drvier has problem with driver \device\SCSI\cpq32fs2

[WebWalker]

Hi,

It's sound like a Controller Error, check this out
http://www.microsoft.com/technet/support/ee/search.aspx?DisplayName=Windows%202000%20Server&ProdName=Windows%20Operating%20System&MajorMinor=5.0&LCID=1033

And type in your error code.

(Sorry for the not filal links, but it's too long...)

Hope it helps

Luca

[Brian_Murdoch · Accepted solution]

Jean,

Make sure that your DL380 nodes have different SCSI ID's for the embedded controllers which talk to the CR3500. One should be at SCSI ID 7 and the other at SCSI ID 6. If the system board on one of the servers has been replaced, the system erased or NVRAM have been cleared you may have duplicate SCSI ID's which will clash when the second server is booted.

Please see attached image which shows the SCSI host configuration.

You can set this up in the BIOS.

Regards,

Brian

[Jean_26]

Ok it's correct. I resolve this problem changing SCSI ID# in first node.

Thanks