ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

CL380 error event id 11 driver cpq32fs2

 
SOLVED
Go to solution
Jean_26
Occasional Visitor

CL380 error event id 11 driver cpq32fs2

I have a server cl380 with problem about smart array controller CR3500.
when i try turn on node two this one hang and event viewer from windows 2000 advance server report this error:

event id: 11
source: cpq32fs2
drvier has problem with driver \device\SCSI\cpq32fs2
3 REPLIES
WebWalker
Advisor

Re: CL380 error event id 11 driver cpq32fs2

Hi,

It's sound like a Controller Error, check this out
http://www.microsoft.com/technet/support/ee/search.aspx?DisplayName=Windows%202000%20Server&ProdName=Windows%20Operating%20System&MajorMinor=5.0&LCID=1033

And type in your error code.

(Sorry for the not filal links, but it's too long...)

Hope it helps

Luca
Brian_Murdoch
Honored Contributor
Solution

Re: CL380 error event id 11 driver cpq32fs2

Jean,

Make sure that your DL380 nodes have different SCSI ID's for the embedded controllers which talk to the CR3500. One should be at SCSI ID 7 and the other at SCSI ID 6. If the system board on one of the servers has been replaced, the system erased or NVRAM have been cleared you may have duplicate SCSI ID's which will clash when the second server is booted.

Please see attached image which shows the SCSI host configuration.

You can set this up in the BIOS.

Regards,

Brian
Jean_26
Occasional Visitor

Re: CL380 error event id 11 driver cpq32fs2

Ok it's correct. I resolve this problem changing SCSI ID# in first node.

Thanks