HPE Community
ProLiant Servers (ML,DL,SL)
1753257 Members
5738 Online
108792 Solutions
New Discussion

Re: CMOS battery

 
Scott Crowell
Occasional Contributor

‎06-11-2003 09:20 AM

‎06-11-2003 09:20 AM

CMOS battery

Everytime I shut my Proliant 3000 down my CMOS looses all of it's settings. I thought it was just the battery but it shows 3.29 volts, under load. Any ideas?

Thanks
0 Kudos
Reply
1 REPLY 1
Claude Boileau
Valued Contributor

‎06-12-2003 12:42 AM

‎06-12-2003 12:42 AM

Re: CMOS battery

Hi,

The battery should remain live when shutdown if losing configuration the board for the battery must be replaced.
Depending upon the speed of your processor you need the following:

System I/O Board with Tray (PCI/ISA), (400, 450, and 500 MHz) 179779-001
System I/O Board with Tray (PCI/ISA), (550 MHz only) 146937-001
System I/O Board with Tray (PCI/ISA), (600 MHz only) 155347-001


regards
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.