cancel
Showing results for 
Search instead for 
Did you mean: 

CMOS battery

Scott Crowell
Occasional Contributor

CMOS battery

Everytime I shut my Proliant 3000 down my CMOS looses all of it's settings. I thought it was just the battery but it shows 3.29 volts, under load. Any ideas?

Thanks
1 REPLY
Claude Boileau
Valued Contributor

Re: CMOS battery

Hi,

The battery should remain live when shutdown if losing configuration the board for the battery must be replaced.
Depending upon the speed of your processor you need the following:

System I/O Board with Tray (PCI/ISA), (400, 450, and 500 MHz) 179779-001
System I/O Board with Tray (PCI/ISA), (550 MHz only) 146937-001
System I/O Board with Tray (PCI/ISA), (600 MHz only) 155347-001


regards