ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

COMPAQ System BIOS-P21

Kerry_16
Occasional Contributor

COMPAQ System BIOS-P21

I have COMPAQ ProLiant DL360. It had 2HD (Smart Array),on which there was RH LINUX 7.3. So I rebuit the Smart Array to install the new Ver. of RH Linux. But I can't get the BIOS for changing setup to make CD-drive bootable. Pressing F10, F9 etc. does not have any result.
Thank's a lot.
Konstantin
1 REPLY
Brian_Murdoch
Honored Contributor

Re: COMPAQ System BIOS-P21

Hi,

If this is a G1 DL360 with no system partition (F10) then you will need to boot from the Smartstart CD (V5.50 or below) or build the System Configuration Utility (SCU) diskettes and boot from them to set the boot order. The CD is normally bootable however (Order A: CD: C: - is default).

Smartstart V5.50 ISO image.....
http://h18023.www1.hp.com/support/files/server/us/download/22678.html

SCU diskette images.......
http://h18023.www1.hp.com/support/files/server/us/download/13227.html

I hope this helps,

Brian