cancel
Showing results for 
Search instead for 
Did you mean: 

CPQ32FS2

Ayman Altounji
Valued Contributor

CPQ32FS2

GETTING EVENT ID 15 "The device, \Device\ScsiPort4, is not ready for access yet." AND EVENT ID 11 "The driver detected a controller error on \Device\ScsiPort4."

Both in the last 4 weeks after upgrading drivers with SSD 2.20. This is hooked up to a HP Surestore DAT 24x6 DAT Changer. I am upgrading to TL891 but don't want same problems with that.
1 REPLY
Ayman Altounji
Valued Contributor

Re: CPQ32FS2

I assume you had nothing similar before the driver update... Does the tape drive still work despite these errors?