CPQPHP Error on ML570

[Freund_1]

We have a problem with a Proliant ML570.

The server have entries in the eventvwr.

Source CPQPHP
Event ID 10
hp ProLiant PCI Hot Plug
Device in slot ( 5-8 ) is not capable of running at 66MHz ( PCI mode ). Please refer to the help file for alternate ways to insert this adapter to the system.


slot 5- 8 are empty but the errors comes all 24h....

that someone habe a idea to resolve this problem?

thanks a lot

Roman Freund

[Prashant (I am Back)]

Hi,

Just one thing which PSP you are using. If older try to update and check again.

Regards,
Prashant S.

[Freund_1]

thank for your answer.

BS: Windows 2003 Server Enterprise english with SP1 and all updates from Microsoft.

PSP Ver 7.3 and all updates from HP SIM
HP ProLiant PCI Hot Plug Controller Driver for Windows 2000/Server 2003 6.3.2.1

greats
Roman Freund

[Arun David]

Hi Roman,

In ML570 if errors relating to CPQPHP come up in event logs its due to the server is attempting to hibernate, the PCI Hot plug filter driver actually prevents this from happening , to resolve this just cold boot the server and there is no need to update the drivers.

Regards

Arun

[Terry Hutchings]

Was this server installed with an image taken from another type of server? This is likely the cause of this problem.

If this is a G1 then the only pci hotplug slots out of the slots indicated are slots 5 and 6. 7 and 8 are not hotplug. 7 is 32bit, 33mhz and slot 8 is a proprietary type slot for the standard peripheral board. If this is a G2, then the slots are going to be different, but the same issue still applies.

[Freund_1]

Hello

i have yesterday updatet the psp to 7.40a and all drivers version are up to date.

the server is a G2 4x1.5GHz.

the Windows Server 2003 is NOT from a image

i have the errors last night again in the eventviewer :-(

greats

[Prashant (I am Back)]

Hi,

Mail me the survey.txt for the same server please

Regards,
Prashant S.
indainvb@gmail.com

[Oleg Koroz]

You might not find survey.txt - not a part of 2003 and PSP 7.x

HP Online Diagnostic Report for windows

http://h18023.www1.hp.com/support/files/server/us/download/22903.html

Verify if you can enable disable Hot Plug function for PCI Slot without any crush and see if there any logs
For more and safe action see page 164 ...

http://h20000.www2.hp.com/bc/docs/support/UCR/SupportManual/TPM_122821-002_rev3_us/TPM_122821-002_rev3_us.pdf

[Prashant (I am Back)]

Hi Kov,

I assume if we install PSP survey.txt will be there. If i am not mistaken.

Regards,
Prashant S.

[Freund_1]

survey.txt