Can not setup Windows NT Server 4.0 on Proliant ML350T01 P600-256 HP US

[Trieu Pham]

I can not setup IWndows NT Server 4.0 on my Proliant ML350 P600-256 HP US, because windows show the crash dump display (blue screen) with the reason :"Inaccessible_BootDevice, irql:0"
My server is P3/600MHz, 128 Mb ECCRam, 9.1Gb Ultra2 SCSI hard disk
Who can help me to resolve this problem ?

Trieu Pham

[Marko H.]

I think your boot controller is not set as first.

Press F10 when prompted at boot and make sure that your boot controller is set as first.

[Trieu Pham]

Hi Marko,
Thank you about your advice, I had done to press F10 to re-config in system BIOS everything is the same.
But now I can setup Windows NT because I used the update for the 32 bit SCSI controller on that Proliant.
Thank you again your time for my trouble.
Trieu Pham