ProLiant Servers (ML,DL,SL)

Can't access PXE settings for Flexfabric 554FLB

 
jb686
New Member

Can't access PXE settings for Flexfabric 554FLB

I'm trying to turn PXE on for a Flexfabric 554FLB in a blade server.

During POST I can see the option to hit Ctrl-P for the utility. I do this, it accepts the command, and tells me it will load after BIOS initilization. But it never does. Just drops straight into the boot menu, and the only option is to load RBSU or reboot.

Any tips for this?

Thanks

2 REPLIES 2
DANDKS
HPE Pro

Re: Can't access PXE settings for Flexfabric 554FLB

Greetings,

Since this being an adapter in a Blade server, are there any other server with the same model adapter & are you able to get into the NIC BIOS using the same key combination.

Please share the model of the server in which this adapter is installed.

Thank you


I am an HPE employee
Accept or Kudo
Marc2525
Occasional Visitor

Re: Can't access PXE settings for Flexfabric 554FLB

Hi @jb686  @DANDKS 

 

I have got a ws460 gen9 with FL554FLB with 2 x 6120xg in a C7000 works great.

Today, I add the same blade with FL554FLB and I've there is no prompt (ctrl-P) during boot sequence and the ports status is down on 6120xg for this blade. However, the FL554FLB appears on server NIC information (c7000 oobm) but not on the blade ilo.

 

Any ideas ?

Thanks