ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Can't copy cpqaray2.sys and cpqaray2.inf during install SBS ver 4.0

Ayman Altounji
Valued Contributor

Can't copy cpqaray2.sys and cpqaray2.inf during install SBS ver 4.0

Setup was unable to copy cpqaray2.sys after same with cpqaray2.inf
I have to install Small Business Edition 4.0 on that server so I used F6 to specify manual install . I installed ATAPI CD-ROM and Compaq Integrated Array 42xx/43xx (cpqaray2.sys) from 2nd disk of SSD for NT ( Smart start CD ver 4.90 ) After disk2 and disk 3 several switches and examining C : drive above mentioned message appears ..
I tried to put disquittes ,CD-ROM in the root with those drivers as well as directory I386 ( burned them on new CD-ROM ) I put on floppy and ... nada
What the hell am I doing wrong ??? By the way it seams to me that is not looking them on a:\ .. where is setup looking for it ?
1 REPLY
Ayman Altounji
Valued Contributor

Re: Can't copy cpqaray2.sys and cpqaray2.inf during install SBS ver 4.0

You have to do it in the opposite order... The Array controller has to be done first (skip detection) and then the ATAPI driver.