HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Can't get NC510 PCIe 10 NIC Installed

 
Jgezels
Regular Advisor

Can't get NC510 PCIe 10 NIC Installed

Hi

Just bought two HP NC510C PCIe 10 Gigabit server adapters. They came in a box without any driver so I fired up a browser and downloaded the drivers.....

I'm using a DL380 G5 Win2003 64Bit R2 and when I try to install the drivers, the system says there is no hardware found that works with these drivers nevertheless New hardware was detected and shown in the device manager....

Any one has some pointers?

Thanks
11 REPLIES
Víctor Cespón
Honored Contributor

Re: Can't get NC510 PCIe 10 NIC Installed

Are you using this driver?

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=3244088&prodNameId=3244089&swEnvOID=1113&swLang=8&mode=2&taskId=135&swItem=MTX-dfa582f2b2bd4b71adb4ebbfed

Also, can you check in System Management Homepage if it detects the new NIC? You can also use Insight diagnostics report utility.
Jgezels
Regular Advisor

Re: Can't get NC510 PCIe 10 NIC Installed

Hi

Yep, that's the driver I used (and all the others that where mentioned if you do a search for that nic)

I'm installing another DL380 (32bit) now and I'll try to install the NIC on that one

I'll keep you posted
James ~ Happy Dude
Honored Contributor

Re: Can't get NC510 PCIe 10 NIC Installed

Hello,

>New hardware was detected and shown in the device manager.

Instead of installing the Drivers Directly; Can you install them thru the Device manager > Right Click the NIC & update driver > then point it to the Driver location ?

:) Regards.
Jgezels
Regular Advisor

Re: Can't get NC510 PCIe 10 NIC Installed

:D allready tried that but unfortunatly no luck ....
Mi6t0
Trusted Contributor

Re: Can't get NC510 PCIe 10 NIC Installed

Hmm :)

Maybe a stupid question, but how much ram do you have? Cause in the quickspecs it says:

NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each NC510C adapter.


KarloChacon
Honored Contributor

Re: Can't get NC510 PCIe 10 NIC Installed

hi

did you already installed the Proliant Support Pack(PSP) that will include all the drivers for sure and the also those are the latest drivers
the link above is from 2006

- remove card
- install PSP
- reboot
- turn off server
- insert card
- power ON and let us know

PSP link

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&prodSeriesId=1121516&prodNameId=3288134&swEnvOID=1113&swLang=8&mode=2&taskId=135&swItem=MTX-8fc2669ab95b4195ae555d658e

regards
Didn't your momma teach you to say thanks!
KarloChacon
Honored Contributor

Re: Can't get NC510 PCIe 10 NIC Installed

Jgezels
Regular Advisor

Re: Can't get NC510 PCIe 10 NIC Installed

Thanks for all you're replies.... I'll start working on those tips... I'll keep you posted!
KarloChacon
Honored Contributor

Re: Can't get NC510 PCIe 10 NIC Installed

ok

will wait

Didn't your momma teach you to say thanks!
Jgezels
Regular Advisor

Re: Can't get NC510 PCIe 10 NIC Installed

Ok, found the issue.....


I changed the riser board and it works ... bizar...

Thank you all for the replies!
Jgezels
Regular Advisor

Re: Can't get NC510 PCIe 10 NIC Installed

Thanks for your help.
Check my solutions above