ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Can't power on server. FAN LED is orange

 
Bpeg
Occasional Contributor

Can't power on server. FAN LED is orange

If you attempt to add the server on the panel lit orange all FAN (1-6).
Prior to inclusion on the indicator port 85/84 codes are displayed (changing every four to six seconds):
00, 40, C0, 80
After switching displays only the code 00. But the monitor did not appear and the signal is not received

Server HP ProLiant DL580 G5.
3 REPLIES
TTr
Honored Contributor

Re: Can't power on server. FAN LED is orange

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01062660/c01062660.pdf

Take a look on the service guide and specifically on page 65. There is no detailed error codes but follow the troubleshooting procedures there.

Also check if there are any status lights on the motherboard.

You have to pull all components that you can (all cards, most or all the memory etc.) and see how far it gets.

See the user guide troubleshooting section, on page 75

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01062643/c01062643.pdf
Bpeg
Occasional Contributor

Re: Can't power on server. FAN LED is orange

After the removal of all components (except for one processor and memory slot), nothing has changed.

Detect only the green LED on iLO2, flashing in the sequence 7,8.
Contik
Occasional Visitor

Re: Can't power on server. FAN LED is orange

Probably its too late ... but i cought the same problem =)

The solution - make sure your the signal cord to the System Inside Display(SID) plugged firmly.

 

My problem was solved =)