Cannot PXE boot off 2nd internal NIC

[KSF77]

Hi,

I have a DL585 G2 and I need to PXE boot off the 2nd internal NIC, however when selecting PXE boot during startup it always tries to use the first port from the additional PCI NIC. I have set the 2nd internal NIC to PXE boot in the BIOS, but this makes no difference, and I have noticed that only the additional PCI NIC's are listed in the Standard Boot Order menu.

Can anyone advise how to force it to use the internal NIC's for PXE? Or how to disable it on the additional NIC's?

Thanks
Kevin

[KarloChacon · Accepted solution]

hi


check this 2 articles

First check if have selected in RBSU
Load embedded Devices First

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=130&prodSeriesId=1842838&prodTypeId=15351&objectID=c01273214


and for this second one check your System ROM version
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01072573〈=en&cc=us&taskId=101&prodSeriesId=1842750&prodTypeId=15351

bye

[KarloChacon]

hi

was the issue fixed?

bye

[KSF77]

Yep, first article was correct. In fact I worked this out before I read your post, but it was correct :)

Thanks