ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot PXE boot off 2nd internal NIC

SOLVED
Go to solution
KSF77
Occasional Contributor

Cannot PXE boot off 2nd internal NIC

Hi,

I have a DL585 G2 and I need to PXE boot off the 2nd internal NIC, however when selecting PXE boot during startup it always tries to use the first port from the additional PCI NIC. I have set the 2nd internal NIC to PXE boot in the BIOS, but this makes no difference, and I have noticed that only the additional PCI NIC's are listed in the Standard Boot Order menu.

Can anyone advise how to force it to use the internal NIC's for PXE? Or how to disable it on the additional NIC's?

Thanks
Kevin
3 REPLIES
KarloChacon
Honored Contributor
Solution

Re: Cannot PXE boot off 2nd internal NIC

hi


check this 2 articles

First check if have selected in RBSU
Load embedded Devices First

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=130&prodSeriesId=1842838&prodTypeId=15351&objectID=c01273214


and for this second one check your System ROM version
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01072573〈=en&cc=us&taskId=101&prodSeriesId=1842750&prodTypeId=15351

bye
Didn't your momma teach you to say thanks!
KarloChacon
Honored Contributor

Re: Cannot PXE boot off 2nd internal NIC

hi

was the issue fixed?

bye
Didn't your momma teach you to say thanks!
KSF77
Occasional Contributor

Re: Cannot PXE boot off 2nd internal NIC

Yep, first article was correct. In fact I worked this out before I read your post, but it was correct :)

Thanks