ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot access ILO-2 on my DL160-G5

Greg Tarsa
Regular Visitor

Cannot access ILO-2 on my DL160-G5

I just purchased a used DL360-G5 for hobby use from Ebay.  It runs fine, but apparently its ILO-2 is not set up for DHCP, I cannot determine the network address it is set to and when booting the system give me no opportunity to get into the RSBU.

 

I see tantalizing mentions of an ILO-override switch for many HP platforms, but can find no such switch on my mainboard.

 

I am running Ubuntu 14.04 LTS on the box.  For reasons unknown, the hp-health package will not install (error: not supported), so I have not been able to install the Debian hponcfg utility.

 

Anyone have any advice for how I might proceed to getting into my ILO?

 

Thanks,

Greg

 

2 REPLIES
Suman_1978
HPE Pro

Re: Cannot access ILO-2 on my DL160-G5

Hello,

 

Is this a DL160 G5 or DL360 G5?

DL160 G5 does not have iLO but has Lights Out 100i.

Click here to see how to use Lights Out 100i.  (Refer to page#10 for configuration)

 

DL360 G5 has iLO 2.

Click here to access DL360 G5 Maintenance and Service Guide. (Refer to page#76 for System maintenance switch)

 

 

Thank You!
I am a HP employee
__________________________________________
Was the post useful? Click on the white KUDOS! Thumb below to say Thank You!

Useful Links for ProLiant Servers

Greg Tarsa
Regular Visitor

Re: Cannot access ILO-2 on my DL160-G5

This is, indeed, a DL160.  No wonder my web searches were coming up empty.

 

I will look over the docs tonight and see if they will help me get going.

 

Thanks,

Greg