HPE Community
ProLiant Servers (ML,DL,SL)
1752781 Members
5850 Online
108789 Solutions
New Discussion юеВ

Re: Cannot go to bios of DL120G6 after adding HP SC08Ge

 
Ladislav Prokopny
Occasional Advisor

тАО06-03-2011 05:33 AM

тАО06-03-2011 05:33 AM

Cannot go to bios of DL120G6 after adding HP SC08Ge

Hi,

after adding the SAS HBA HP SC08Ge I cannot enter the ROM-Based setup of the server. I press F10, after some initialization I see "Entering setup" at the bottom of the screen, after 0.5 second I see "Press any key to continue" and the server starts booting ... The same is through the iLo or with directly attached monitor/keyboard.

Please any suggestions are welcome, as this seems to be critical for our usage...
0 Kudos
Reply
2 REPLIES 2
Zygmunt Krawczyk
Honored Contributor

тАО06-08-2011 05:02 AM

тАО06-08-2011 05:02 AM

Re: Cannot go to bios of DL120G6 after adding HP SC08Ge

SC08Ge is not supported in DL120G6.
0 Kudos
Reply
Ladislav Prokopny
Occasional Advisor

тАО06-08-2011 05:05 AM

тАО06-08-2011 05:05 AM

Re: Cannot go to bios of DL120G6 after adding HP SC08Ge

I was afraid of this answer..
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.