ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot go to bios of DL120G6 after adding HP SC08Ge

Ladislav Prokopny
Occasional Advisor

Cannot go to bios of DL120G6 after adding HP SC08Ge

Hi,

after adding the SAS HBA HP SC08Ge I cannot enter the ROM-Based setup of the server. I press F10, after some initialization I see "Entering setup" at the bottom of the screen, after 0.5 second I see "Press any key to continue" and the server starts booting ... The same is through the iLo or with directly attached monitor/keyboard.

Please any suggestions are welcome, as this seems to be critical for our usage...
2 REPLIES
Zygmunt Krawczyk
Honored Contributor

Re: Cannot go to bios of DL120G6 after adding HP SC08Ge

SC08Ge is not supported in DL120G6.
Ladislav Prokopny
Occasional Advisor

Re: Cannot go to bios of DL120G6 after adding HP SC08Ge

I was afraid of this answer..