ProLiant Servers (ML,DL,SL)
1753532 Members
6293 Online
108795 Solutions
New Discussion юеВ

Cannot install Windows Server 2008 Standard x32 on old Proliant ML150 G2 (no disk drives detected)

 
SOLVED
Go to solution
Dimitar Popovski
New Member

Cannot install Windows Server 2008 Standard x32 on old Proliant ML150 G2 (no disk drives detected)

During OS clean install (booted from original DVD) at the point of choosing where to install the OS, there are no disk drives detected (RAID1, 2x148GB).

I tried to use [Load Drivers] from USB key and used all the HP drivers I could find, but none of them worked - still disk drive(s) are not visible and I cannot continue the installation of the OS.

I found lot of posts and solutions on similar problems, but none specifically for the old ML150 G2. I tried some of them, but it didn't worked.

Is there an existing (and working) Adaptec Embedded SATA RAID driver for Windows 2008 x32 for Proliant ML150 G2?

Any experience and/or advise is more than welcomed! I am desperate and prepared to try anything!

Thanks!
5 REPLIES 5
Ali
HPE Pro
Solution

Re: Cannot install Windows Server 2008 Standard x32 on old Proliant ML150 G2 (no disk drives detected)

Hi Dimitar,

windows 2008 is not supported offically on ML150 G2 server.

the driver that you are looking for is
HP ProLiant ML150 G2 Embedded SATA Controller Windows Driver for Windows

try these two drivers:
HP ProLiant ML150 G2 Embedded SATA Controller Windows Driver for Windows 2003 x64 Editions

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=435422&prodNameId=3279685&swEnvOID=1113&swLang=8&mode=2&taskId=135&swItem=MTX-UNITY-I23854

HP ProLiant ML150 G2 Embedded SATA Controller Windows Driver

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=435422&swItem=MTX-UNITY-I22734&prodNameId=3279685&swEnvOID=1005&swLang=8&taskId=135&mode=5

hope this helps,

thanks,
Aftab
I work for HPE
Looking for a quick resolution to a technical issue for your HPE products? HPE Support Center Knowledge-base тАУ Just a Click Away!
See Self Help Post for more details

Accept or Kudo

Dimitar Popovski
New Member

Re: Cannot install Windows Server 2008 Standard x32 on old Proliant ML150 G2 (no disk drives detected)

The 2nd link helped and I can see the disk drives now! BIG THANKS!
Ali
HPE Pro

Re: Cannot install Windows Server 2008 Standard x32 on old Proliant ML150 G2 (no disk drives detected)

Hi Dimitar,

that's wonderful!

it would be helpful for those willing to install windows 2008 OS on old hp servers.

windows 2003 32 bits driver has done the trick.

thanks again.
Aftab
I work for HPE
Looking for a quick resolution to a technical issue for your HPE products? HPE Support Center Knowledge-base тАУ Just a Click Away!
See Self Help Post for more details

Accept or Kudo

Viper11
New Member

Re: Cannot install Windows Server 2008 Standard x32 on old Proliant ML150 G2 (no disk drives detecte

How Did You Get This To Work Its Not Showing Drives For Me With The Server 2003 x86 Driver

Ranjeet_Gupta
Occasional Visitor

Re: Cannot install Windows Server 2008 Standard x32 on old Proliant ML150 G2 (no disk drives detecte

Hi Please send the full details of installation of Windows Server 2008 statndard on ML150 G2 server. i am new for it.