ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot see shared storage

 
Ayman Altounji
Valued Contributor

Cannot see shared storage

System is out of box with 1x 18GB in each node (temp) and 4x18GB in shared storage.
Should the SCSI card in node 1 see the CR3500 as an attached device at boot up? Currently, it reports no attached devices. HELP?
2 REPLIES
Ayman Altounji
Valued Contributor

Re: Cannot see shared storage

Continue... It is very important that you check for each node the SCSI ID. The SCSI ID must be different on each node. For example : Node1 has SCSI Controller on port 1 with SCSI ID 6 and on port 2 SCSI ID 7. For Node 2 SCSI Controller on port 1 with SCSI ID 7 and on port 2 SCSI ID 6. This way you will not have SCSI errors our strange faults.
Ayman Altounji
Valued Contributor

Re: Cannot see shared storage

If this didn't fix the problem, let us know - email support@compaq.com