ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Cannot ssh to HP iLO 4 v 2.10

Nguyen_Son
Visitor

Cannot ssh to HP iLO 4 v 2.10

Hi all

 

I have an HP server with iLO 4 firmware version 2.10.

 

HP Lights-Out Online Configuration utility
Version 4.5.0 Date 07/17/2015 (c) Hewlett-Packard Company, 2015
Firmware Revision = 2.10 Device type = iLO 4 Driver name = hpilo
Host Information:
            Server Name: xxx
            Server Number:

 

I installed CentOS Linux release 7.1.1503 (Core) on this server, and used hponcfg-4.5.0-0.x86_64.rpm to config the iLO port shared with ethernet.

 

 

And now, i can ping this IP and check listening port by nmap

Host is up (0.00046s latency).
Not shown: 996 closed ports
PORT      STATE SERVICE
22/tcp    open  ssh
80/tcp    open  http
443/tcp   open  https
17988/tcp open  unknown
MAC Address: xxx (Unknown)

Nmap done: 1 IP address (1 host up) scanned in 14.76 seconds

 

But i cannot ssh to the server by account admin using Centos terminal.

 

Can someone help me with this?

 

thanks.

6 REPLIES
Dennis Handly
Acclaimed Contributor

Re: Cannot ssh to HP iLO 4 v 2.10

What model server do you have?

Jimmy Vance
HPE Pro

Re: Cannot ssh to HP iLO 4 v 2.10

When in shared port mode the host OS cannot access the iLO. You will need to access iLO from a separate client

 

 




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Nguyen_Son
Visitor

Re: Cannot ssh to HP iLO 4 v 2.10

Hi Jimmy

 

thank you for your reply.

 

Now i can ssh to the iLO from server by terminal, but when fencing, it reported "Unable to connect/login to fencing device"

 

I'm using GFS2 on HP server with fencing by iLO technology.

 

My stonith fencer:

 

pcs cluster cib stonith_cfg
pcs -f stonith_cfg stonith create ilo_fencer01 fence_ilo4_ssh pcmk_host_list="host01" ipaddr="IP01" login="Administrator" passwd="password01" action="reboot"
pcs -f stonith_cfg stonith create ilo_fencer02 fence_ilo4_ssh pcmk_host_list="host02" ipaddr="IP02" login="Administrator" passwd="password02" action="reboot"
pcs -f stonith_cfg stonith create ilo_fencer03 fence_ilo4_ssh pcmk_host_list="host03" ipaddr="IP03" login="Administrator" passwd="password03" action="reboot"
pcs -f stonith_cfg stonith create ilo_fencer04 fence_ilo4_ssh pcmk_host_list="host04" ipaddr="IP04" login="Administrator" passwd="password04" action="reboot"
pcs -f stonith_cfg property set stonith-enabled=true
pcs cluster cib-push stonith_cfg

 

Can someone help? thanks


Jimmy Vance wrote:

When in shared port mode the host OS cannot access the iLO. You will need to access iLO from a separate client

 

 


 

Jimmy Vance
HPE Pro

Re: Cannot ssh to HP iLO 4 v 2.10

if I recall, for iLO4 the fencing agent to use is ipmilan




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!   
Nguyen_Son
Visitor

Re: Cannot ssh to HP iLO 4 v 2.10

Nice guide

I can config the fencing agents.

But after i create the agents, one of my nodes is rebooted. Can you show me best practise for fencing configuration? I mean value of parameters: delay, power-timeout, power-wait....

thanks

 


Jimmy Vance wrote:

if I recall, for iLO4 the fencing agent to use is ipmilan


 

Jimmy Vance
HPE Pro

Re: Cannot ssh to HP iLO 4 v 2.10


Nguyen_Son wrote:

Nice guide

I can config the fencing agents.

But after i create the agents, one of my nodes is rebooted. Can you show me best practise for fencing configuration? I mean value of parameters: delay, power-timeout, power-wait....

thanks

 


Jimmy Vance wrote:

if I recall, for iLO4 the fencing agent to use is ipmilan


 


Sorry, I don't have any suggested best practice. Maybe another users can help provide more details




__________________________________________________
No support by private messages. Please ask the forum!      I work for HPE

If you feel this was helpful please click the KUDOS! thumb below!