CentOS 7 on HP DL320e Gen8 Server

[Jimmy Vance]

The B320i doesn't need the blacklist statement, only the B110i and B120i

As I mentuioned above the syntax has changed,

for RHEL 6 the syntax is blacklist=ahci dd

for RHEL 7 the syntax is modprobe.blacklist=ahci inst.dd

Here is the direct link to the file on the FTP site for RHEL 7.0

https://support.hpe.com/connect/s/softwaredetails?language=en_US&collectionId=MTX-4d2aeb1d03944c17&softwareId=MTX_ddca9dd899c54e6082a5b80859&tab=Enhancements

Just for reference the B110i works similar, but does not use the same driver as the B120i/B320i

[Moderator edit: Updated the link]

[levglonti]

I tried your solution, but ended unsuccessfully - durning installation on the console are shown few error messages

hpvsa: request for unknown module key "Hewlett-Packard Company HP UEFI Secure Boot 2013 DB Key (here comes long key) err -11

hpvsa: disagress about version of symbol scsi_dma_map

hpvsa: Unknown Symbol scsi_dma_map (err -22)

hpvsa: disagress about version of symbol scsi_remove_host

hpvsa: Unknown Symbol scsi_remove_host (err -22)

and a lot of similar errors

finally instalation stops with message 

dracut-initqueue[822]: warning: Could not Boot

dracut-initqueue[822]: warning: /dev/root does notexists

and system is dropped to emergency shell

what can i do? where is error or problem?

[Jimmy Vance]

Are you installing v7.0 or v7.1

[Jimmy Vance]

This thead contains the same instructions

https://community.hpe.com/t5/proliant-servers-ml-dl-sl/installing-centos-7-on-ml310e-gen8-v2-drivers-for-raid-1-b120i/m-p/6718353#M147427

[Moderator edit: Updated the link]