Change from RAID 0 to RAID 1 - BL25p

[Rick Bellott]

In a BL25p, currently it is setup as RAID 0, one internal 300 GB SCSI drive. Is there a more simple way to add a 2nd drive and move to RAID 1, rather than losing all data on existing drive/array?

Thanks

[sandeep_raman · Accepted solution]

Hello Rick,

Yes there is.
Add the 2nd 300Gb disk to existing array and migrate to raid level 1.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00215212&jumpid=reg_R1002_USEN

SRH

[Rick Bellott]

This worked like a charm. Highlighted the current array, clicked Expand array, added the 2nd drive. Then highlighted the logical drive, clicked Migrate, and changed from RAID 0 to RAID.

Thanks much for the assistance